identify faulty wiring

How to Identify Faulty Wiring in Your Home?

According to the Australian Bureau of Statistics, more than 5400 houses catch fire every year due to inappropriate electrical distribution. The equipment includes wiring, switches, cords, meters, plugs, lamps, and bulbs. Other equipment that set the houses on fire is heating systems, appliances, and service maintenance equipment (power saws, electric fencing, etc.).

Many Australians do not take adequate steps in preventing short-circuits or other power-related accidents. Hence, it is necessary to have the contact number of an electrician for homeowners handy in an emergency.

You need to check the fuse box every six months to prevent accidental fires at home. Various signs can help you in identifying which meter panel has faulty wiring. Let’s study those signs.

Track the Circuit-breaker Trips

The job of a circuit-breaker is to trip when it is overloaded. And it is found in all households to prevent short-circuits. On tripping, you can switch it back and continue with your job.

But if the circuit-breaker trips more often, then it is a first sign that you need to get the meter panel checked.

You Smell Burning Odour

Burning smell indicates that the damage has already taken place, but you need to be sure which part of the meter panel is burnt.

You must immediately call for help and get the entire wiring replaced. The fire damage spreads rapidly, and only a professional electrician can help you in preventing additional damage.

Check for Chewed or Frayed Wiring

The wiring is usually frayed by amateur handymen, rodents, or pets, but it can be a significant fire hazard. You must inspect a professional electric service provider and get the faulty wiring checked.

If such chewed or damaged wire is left unattended, it may cause shock and fire outbreaks. It is better to get it replaced by the best electrician for homeowners and prevent the mishap.

The Light Flickers and Dims Frequently

If your light buzzes or dims when switched on or flickers when other appliances are turned on, then it is a clear sign that there is a fault in the electrical wiring. The Ausfire Protection inspects granting certifications to the electrical products and equipment.

Make sure you buy all certified electrical products for your home-use. Flickering is a sign that there is damaged or outdated wiring in the circuit panel. And it is time to upgrade the wiring system of your home.

Check for Smoke or Discolouration

You must keep a check on the outlets for your home. If you notice discolouration marks or smoke on the outlets, it shows a damaged wire. The heat generation in the electric panel discolours the wiring and damages the other wires as well. Leaving the damaged wiring unchecked can increase the chances of fire accidents.

Vibrating Wall Outlets

If you feel heat or vibrations on the outer side of the wall outlets without even touching it, then you must call an electrician for help. There doesn’t need to be severe damage to the wiring panel. Sometimes, due to overload, the vibrations take place.

But to be on the safest side, you must get all the meter panels, and wiring checked.

Leave a Reply

Your email address will not be published. Required fields are marked *