blocked drains

Blocked Drain Relining: How To Clear A Blocked Drain

Blocked drains are one of the most prevalent plumbing issues that people in Australia and around the world face on a daily basis. Because blockages can happen at any time, it’s a good idea to be prepared.

Blocked drain relining in your drains can cause water to flow out and cause damage to your home or company if left untreated. Burst pipes might occur as a result of severe blockages, necessitating even more costly repairs.

Here are some of the most common options for clearing blocked drains with The Relining Company Australia.


Pour a saucepan of boiling water down the drain for a quick and easy remedy for blocked drains. In many cases, this will be enough to loosen or dissolve the obstruction without requiring more invasive procedures.

Heat may loosen joints in PVC pipes, so this process should only be performed on metal or ceramic pipes. For PVC pipes, instead of boiling water, use hot tap water. Solid blocks are unlikely to be cleaned with this approach, which may work on oil or food build-up.


Bicarb soda (baking soda) and white vinegar can be used to make a DIY drain cleaner. Pour the bicarb first, then the vinegar down the drain. To keep the mixture from bubbling out of the pipe, cover the drain.

Bicarb and vinegar combine chemically to produce oxygen, which scours the inside of the pipes and clears them out. It’s possible that you’ll have to repeat the treatment a few times before the obstruction is completely removed.

After the solution has worked its way through the blockage, flush your pipes with hot water to remove any residue.


Drain cleaners containing caustic chemicals can be found at your local hardware shop or supermarket. Grease, hair, food, and other common clogs can all be removed with these substances.

They are, however, hazardous to the environment and should be handled with caution. Solid masses, such as tree roots or small household items, will not be cleaned with caustic chemicals.

When working with chemical cleaners, always wear gloves and eye protection, and flush your pipes with water afterward to remove any leftover chemicals.


A plunger can unclog a clogged drain just like it can unclog a toilet. Before you start plunging, make sure to plug any overflow spouts to ensure a good seal.

The plunger’s up-and-down pressure can assist release any blockages, allowing your pipes to flow freely once more. Plunging works best for solid obstructions, although it’s ineffective against grease and mineral deposits.


Snake Covert Camera

For more serious obstructions, a plumber’s snake, sometimes known as an electric eel tool, can be used. The rotating coil at the cable’s end rotates quickly, chipping away at the obstruction until it is cleared.

Because snakes have a limited range, the obstruction must be close to the drain’s opening in order for them to be effective. They may also cause damage to your pipes, so it’s wise to explore alternative options first.

Plumbers’ snakes are available at most hardware stores, or you can hire a licensed plumber to complete the task for you.


Specialists are always delighted to assist the clients, both residential and commercial, with clearing clogged drains and other common plumbing difficulties here at The Relining Company Australia.

Folks are experts at what specialists do and have the knowledge and experience to tackle almost any challenge you may throw at them.

You may contact them to learn more about the services and how experts can assist you in keeping your drains running properly at all times. To make an appointment, give them a call right now.

Leave a Reply

Your email address will not be published. Required fields are marked *